Showing posts with label nrv10. Show all posts
Showing posts with label nrv10. Show all posts

Wednesday, April 16, 2008

A post on Microphones, Sound Cards, and Sound Proofing

MICROPHONE!
Digging through some of the old equipment at one of the casting studios I work at (the oldest voice over casting studio in LA Woot!) I stumbled on a box of old microphones. Most were crap, but tucked away was an original capsule SM56! Had to tinker with the impedance, but got it set up, and it's now enjoying full time use. Near as I can tell, the mic is almost 40 years old!










SHURE SM57

SOUNDCARD!
I love Stumbleupon. It sucks so much of my life away, just stumbling round teh intarwebs.
Caught this Flickr pic from sneeka2 comparing the Firewire410 (my soundcard) to the Mac Mini. I was actually kinda surprised.



mini
Originally uploaded by sneeka2













I've been kinda disappointed in soundcards of late. Besides some of the Mixer/Interface hybrids, there's been depressingly little development. Is there anything you readers are looking forward to? Let me know!

M-AUDIO NRV10


SOUND PROOFING!
For those of you trying to set up your own recording booths, check out this vid from the Revision3 Gazette, and you can see what they went through to reduce echo in their studios. Now obviously this is reinforcement on an industrial level, but the lessons here are still valid for us closet junkies.



someaudioguy some audio guy voice over demo production voice acting adr dubbing animation anime narration

Tuesday, March 25, 2008

NRV10 Update - You CAN dasiy-chain the NRV10 with the Firewire 410!!!

I LOVE Firewire!

I updated the driver on my desktop to play with the NRV10. Apparently there is now only one "family" driver for M-Audio firewire products.

I didn't feel like disconnecting my FW410 to plug in the NRV10, so I used the spare port on the FW410. Upon rebooting, my computer ran it's updates, and could see both the FW410 and the NRV10.

I fired up Acid, and set up a couple audio tracks. Acid not only saw both devices, but let me run inputs from different devices at the same time.

Now this might not seem like a huge deal. You've always been able to daisy-chain firewire devices, but usually that means hooking up an external hard drive to your external soundcard. As far as I knew, very few sound cards could be daisy-chained to show up as a single multi-input device. Those devices usually had to match as well, as they would have to use the same driver. M-Audio's firewire "family" driver marks the first time, that I know of, where two different devices can be linked and used as one big interface. This is something that can ONLY be done over Firewire, as USB can't share resources like this.

MAudio NRV10 Analog Mixer and Firewire Audio Interface

What do you even call that? Asymmetrical audio interface daisy chaining?

I don't know, but between the FW410 and the NRV10 I now have 12 routable inputs (10 analog 2 stereo mix down), 2 digital inputs, 10 analog outs (18 software routable outs), and 2 digital outs all in a fairly compact set up.

I'm stoked!

M-Audio FireWire 410 4-In / 10-Out FireWire Mobile Recording Interface

And if you want to see more shots of the NRV10, you can click here for my un-boxing post!

Monday, March 24, 2008

MONSTER POST - AudioGuy got an NRV10 - Lots of Pictures!

MAudio NRV10 Analog Mixer and Firewire Audio Interface

WARNING: LOTS OF PICTURES FOLLOWING.
LOAD TIMES MAY VARY.
YOU HAVE BEEN WARNED.

So I just wanted to say thanks for all the comments and emails regarding my call for help. I needed a new mixer, and I was trying to decide between the NRV10 and the Zed-14. I ultimately decided against the Zed-14 when I found out the USB port only carried buses not individual inputs. That clinched it. I put in my order for the NRV10, and it just showed up today.

WOOT!

I took a bunch of pictures of the unboxing and first setup, so prepare for geek-pr0n!

Biggelow helped inspect the packing:










Huh? A box, within a box, within a box...










There. That's better:










Biggs momentarily gets bored and re-inspects packing:










He then realizes there's more to sniff:










The outer box:









Biggs checks out the innards:









Finally the NRV10!









And profile:









"Hmmmm smells good"









Behold the NRV10!







The NRV10 by my old Behringer (I never throw anything away):







Back Panel:










Plugging in some mics!










Soundforge is ready:









That's a lot of audio!









Biggs tuckered out from all the excitement:


OK, so first impressions.

I love this thing!

Setup has been the easiest I've ever had with any M-Audio kit. M-Audio drivers are "IN"-famous for being a little twitchy. I went and downloaded the newest from the web (not even bothering with the CD), and my laptop recognized the mixer without a hitch. Soundforge and Audition instantly knew what to do with the machine, and so far the only program giving me grief is Pro Tools, which refuses to see more than 4 channels. That's really obnoxious, as PT compatibility was a main buying point for me. Watchagunnado, a day without a Pro Tools annoyance...

Firewire is a perfect data transfer protocol. My laptop is OLD (1.8GHz P4, 768MB RAM), but it had no issues simultaneously recording 5 mono tracks and a Stereo Main mix-down @ 24/96. I can't wait to seriously light this thing up.

Build quality feels solid. Metal casing, the faders feel tight (really tight), but the knobs are all a little too loose for my taste. If you're really working a mix, a careless gesture could flip a couple knobs around (especially as placement is really close, it is a portable mixer).



The only thing I really don't like about the mixer's layout is how it vents. Rather than have any airflow come out the back of the mixer (see above for the back panel shot), heat comes out the bottom of the mixer. The bottom. What the mixer rests on. There are some stubby feet, but they wont guarantee a lot of clearance. Heat kills electronics, so if you aren't going to mount this puppy, you might want to throw a book under the back feet to aid in cooling.

In all, I'm very happy with this mixer, and am looking forward to really putting it through its paces. Maybe some Shakespeare? Hmmmm...

Thanks again to everyone that helped me make up my mind through comments and emails!

MAudio NRV10 Analog Mixer and Firewire Audio Interface